How to Unclog a Vacuum Hose Properly?

A vacuum cleaner sucks the dust and dirt from the carpets and floors. There is a hosepipe that transmits the airflow to suck the dust. The hosepipe connects the sucker pad and the bins inside the vacuum machine. If you don’t clean the pipe and the bin bag regularly the hose pipe will be clogged.

If the pipe is clogged it becomes hard to clean the carpets or floors as it loses suction. So it is essential to clean the pipe on a regular basis. Here I will discuss the step-by-step process of how to unclog a vacuum hose pipe?

How Would You Know That Your Vacuum Is Clogged?

When you use a vacuum cleaner regularly you will realize some differences if there is a problem with your vacuum machine. Such as if the fan is working but it doesn’t suck rubbish then you should understand that the hosepipe is clogged. There are more conditions below that you may find.

How Would You Know That Your Vacuum Is Clogged?

  • Your vacuum cleaner is not picking the dirt as it should do.
  • Replacing or cleaning the filter may not improve the condition.
  • Changing the bin bag may not change its sucking condition.
  • The attachment pad has no suction because the suction port is clogged.

What You’ll Need to Unclog a Vacuum Hose:

If you are facing the above conditions you should realize that the hosepipe is clogged. Here are the required tools to fix the problem.

  • A scissor
  • A garden hose
  • Soapy water
  • A clean cloth
  • A dryer sheets
  • Wire hanger

Safety Precautions When Unclog a Vacuum Hose

When you are in the repairing process you should maintain safety precautions to avoid personal injuries. Also, it is important for your machine’s safety. Such as

Safety Precautions When Unclog a Vacuum Hose

  • Clean the beater brush of the vacuum cleaner to get rid of hair, thread, yarn, and other things that can stick with it.
  • Be careful about the vinegar solution, don’t spray the rubber belt as it may become sticky.
  • Don’t spray over the electric socket of the machine. And don’t plug the socket until all the parts dried up completely.

How to Unclog a Vacuum Hose Pipe?

If your vacuum hose pipe is clogged you should continue reading the article. First, you should diagnose and gather the equipment mentioned above then follow the steps below for how to unclog a vacuum hose pipe.

How to Unclog a Vacuum Hose Pipe?

Step 1 – Unplug the Vacuum

You cannot fix the problem while the machine is running as it may cause more problems to the machine. Therefore unplug the machine from the electrical outlet.

Step 2 – Check the Hosepipe

Before you start the process, find the clog inside the hose pipe. If the vacuum is really clogged do the following

  • Take out the hosepipe from the attachment and try to vacuum it.
  • Put the pipe upward and pass a small something down to the hose.
  • Put a coin inside the hose if it comes through the pipe you are sure that the pipe is clear.
  • If not then the hose pipe is clogged for sure.

Step 3 – Unclip the Vacuum Tube

Now you confirm that the hose pipe is clogged so unclip the tube from the vacuum machine. Because without removing the tube you cannot clean inside it. Hold it before your eyes and look into the tube. Or you can do the test described in step 2.

Unclip the Vacuum Tube

Step 4- Thrust the Clog

You can take a wire and put it inside the hose directly. Push the wire inside the pipe as it may push the solid waste to come out through the other end of the pipe. While doing the process don’t be rough as it may puncture the pipe.

Step 5 – Clean the Vacuum Hose

Take a broom or straight stick, wrap it with a dry cloth and enter it inside the hose pipe. Try cleaning the pipe with tender care to avoid any damage to the pipe.

Step 6 – Sanitization

Once you have finished unclogging the hose pipe, there should be a foul smell around the hose pipe. So you need to sanitize it to disinfect. Use vinegar by following the below steps to get rid of the awful smell.

Sanitization

  • Make a solution with vinegar and water with the proportion of ⅓ rd vinegar and ⅔ rd water.
  • Wrap the broom with a paper towel and sink it in the solution.
  • Enter the broom inside the mob and use a gentle motion to clean the pipe.
  • Let it dry to vanish the vinegar odor otherwise, dust will stick thoroughly inside the pipe again.

Preventive Tips to Use the Vacuum Cleaner

A vacuum cleaner can be dangerous if not handled properly, though it is the best vacuum Cleaner for Bad Back. Using the machine with regular maintenance can help to use the gadget for a long time. To avoid any danger while using the machine try to follow these preventive tips to manage the vacuum cleaner.

Preventive Tips to Use the Vacuum Cleaner

  • The machine comes with a handle and a power cord. Use the handle to lift or pull it to move it around the house.
  • Don’t pull with a power cord as it may lose the power connection and cause an electric shock.
  • Don’t pick coins, nails, screws, and any sharp objects as they may damage the machine or get stuck inside the hose pipe.
  • When you suspect any problem with the vacuum cleaner don’t use it until the gadget is repaired. As it may damage more or cost more to repair.
  • Don’t use the machine on a wet floor to avoid shock. Also, be careful about flammable materials.
  • Though a vacuum cleaner sucks the dust and powder avoid too much powder or dust as it may clog the filter.
  • Change the bin bag when it is full and avoid a faulty extension cord.

Conclusion

A vacuum cleaner may have a hard structure from the outside but may have fragile and sensitive electronic appliances inside. Moreover, the hose pipe and the other external parts are attached separately. Amongst them the hose pipe causes more disturbances as it has a bent part.

Therefore it is important to take care of the machine while using it. You can be benefitted from the article by learning the preventive tips and how to unclog a vacuum hose. If you like the information included in the article give us a thumbs up, thanks.

Leave a Comment